If bleeding continues, allow primer to dry a full 24 hours before top-coating.Ĭlean Up & Disposal Blank space if empty.
If the stain bleeds through the topcoat, apply a second coat of primer and test again before top-coating the entire area. After priming, test for stain bleed-through by applying the topcoat to a small section. For disaster restoration, use a product such as water-base KILZ MAX® Primer or oil-base KILZ® Original Primer to permanently block severe stains and odours.
Intermix containers of same colour and product to ensure colour and sheen uniformity. Product is formulated for use at package consistency only. Certain colours may require additional coats for complete hide. Coverage: Up to 37 m 2 (400 sq ft) per 3.79 L depending on the surface texture, porosity and application method. Brush: Use a high-quality nylon/polyester brush. Roller: Use a high quality 10-13 mm nap roller cover on smooth surfaces or 13-19 mm nap roller cover on semi-rough or porous surfaces. Use product when the surface and air temperatures are between 2-32☌. Prime new drywall with a product such as BEHR ® Kitchen, Bath & Trim Stain-Blocking Primer & Sealer No. Surfaces to be painted must be cleaned, primed with an appropriate primer and ready to accept a finish coat. Fill all gaps with a 100% acrylic, siliconized, paintable caulking and allow to completely dry prior to coating.. Glossy surfaces must be scuff sanded with appropriate sandpaper prior to coating. All surfaces must be clean, free of dust, chalk, oil, grease, wax, polish, mold and mildew stains, loose and peeling paint, rust and all other foreign substances. The following steps are recommended for product performance. Surface Preparation Blank space if empty. Can be applied to properly prepared and primed interior drywall, wood, metal, architectural plastics, cured plaster and masonry.
0 kommentar(er)
